Check the status of the freight elevator. The freight elevator will likely have a visual indicator to show whether the elevator can be used. If you see "INUSE" on the freight elevator's floor indicator, it means that the elevator cannot be moved because someone else is already using it to transport freight. Wait until the "INUSE" indicator disappears before trying to use the freight elevator yourself. If the elevator is in use, and you attempt to call the elevator, it will briefly sound an alarm inside the lift. Some may close the door on its own, while others you need to locate the freight elevator and manually send it down. This can be a pain, unless if a passenger elevator is nearby.
Unlock the freight elevator. If you are in a service area, the freight elevator will obviously be locked to prevent unauthorized passengers from using it. You may need to use a key or an access card to be able to use the freight elevator.
Press the call button on the elevator. If the elevator is not in use, it will immediately send the freight elevator to your floor. Once it is at your floor, you should be able to visibly see it in the door window.
Open the doors. While some freight elevators have electronic doors that open automatically, others need to be opened manually. These require pressing a "DOOR OPEN" button next to the call button or physically moving the door with a lever or strap.
Move your freight into the lift. This could be boxes, furniture, vehicles, or any other physical goods that need to be transported to a different floor.
Close the doors. The doors of a freight elevator will stay open until you physically close it. You may have to manually move the physical doors into place until they lock, or you may need to press the "DOOR CLOSE" button on the elevator panel.
Start the elevator. To do so, select your floor on the floor panel. This will immediately set the elevator in motion.
Open the doors. Once the elevator stops at your floor, you will need to open the doors. Some elevators do this automatically, while others you need to press the "DOOR OPEN" button on the panel or physically open the doors.
Remove your freight from the lift. This could be boxes, furniture, vehicles, or any other physical goods that need to be transported to a different floor.
Close the doors. Once you are done, you will need to manually close the doors. Some elevators do this automatically when the next person needs to use it, while others you need to press "DOOR CLOSE" next to the call button or physically close the doors.
Comments
0 comment