Attaching a Snap-Style Pacifier Clip
Undo the snap at the end of the strap. Locate the snap and use your fingers to pry it open. Pull it apart so that the end of the strap is accessible. If the strap uses Velcro, then use your fingers to pull apart the Velcro.
Slip the strap through the handle or opening on the pacifier. Locate the opening in the edge of the pacifier or handle. Insert the strap into the opening with the snap facing out away from the nipple of the pacifier. If the strap uses Velcro to secure itself, then make sure the Velcro is facing away from the nipple. Tip: Some pacifier clips are made specifically for a certain brand of pacifier. Check to see that the pacifier and clip you are using are compatible before you try to attach them.
Press the snap to close it again. Line up the snap pieces on the other side of the pacifier opening or handle. Then, press them together again to secure the strap to the pacifier. If the strap uses Velcro, press the Velcro together to secure the strap.
Inserting a Loop-Style Pacifier Clip
Push the end of the loop into an opening or handle on the pacifier. Locate the opening or handle on the pacifier where you want to attach the pacifier clip. Squeeze the end of the loop to make it smaller and then push it into the opening or handle. Pull the loop out on the other side of the opening until the edge of the pacifier or handle is up against the strap. The loop is often made from a thick material, such as leather, cord, or canvas.
Insert the end of the clip’s strap through the loop. Next, bring the clip end of the pacifier strap around and through the loop. Insert the clip and strap through the loop. The strap may be a flat ribbon, or it might have beads or other decorative items on it. However, it should still fit through the loop easily.
Pull to tighten the loop around the edge of the pacifier or handle. Tug on the strap until the loop tightens around the pacifier’s edge or handle. This will secure the pacifier clip to the pacifier and it is now ready to use!Tip: Make sure that you can still undo the loop when needed. Don’t pull it so tight that it will be difficult to remove the strap if you need to wash it or sanitize your baby’s pacifier.
Securing the Clip on Your Baby’s Clothing
Squeeze the clip to open it up. The clip part of a pacifier clip is at the opposite end of the strap where you attached the pacifier. Locate it and squeeze the handles on the clip to open it.
Find an unobtrusive spot on your child’s clothing and pinch it. A good place is on the fabric over your child’s shoulder. This is also often where fabric is doubled up on onesies, so it may be a more secure place to attach the clip. Use your fingers to grasp a piece of the clothing where you want to attach the clip. The clip is probably too strong for your child to undo, but it’s still a good idea to attach it somewhere they won’t be as tempted to mess with it.
Slip a piece of your child’s clothing into the open clip and close it. Continue to hold onto the clothing with 1 hand and the open clip with the other hand. Slide the clothing piece into the clip and then release the handles to close the clip around the clothing. Warning: Be extra careful not to pinch any of your child’s skin or hair in the clip when you attach it.
Comments
0 comment